In the size range of 0.5-1.5mm, copper slag can be used as an abrasive material for surface preparation, cleaning, and abrasive blasting. Its angular and sharp edges make it effective for removing coatings, rust, and other contaminants from surfaces.

Rs 10 /Kg

Rs 20 /Kg

Copper slag in the size range of 0.5-1.4mm refers to the granular particles of copper slag that fall within that specific size range. Copper slag is a by-product of the copper smelting and refining process and is commonly used in various industrial applications.

Rs 10 /Kg

Rs 20 /Kg

Copper Slag 0.5–2.5mm

Rs 10 /Kg

Rs 20 /Kg

Copper Slag 0.2–1.4mm

Rs 10 /Kg

Rs 20 /Kg

PS Ball is an abbreviation for Precious Slag Ball, a novel material created by rapidly cooling slag generated during the steelmaking process using our proprietary Slag Atomizing Technology (SAT). It outperforms Garnet sand & copper slag in compressive strength, hardness, & anti-weathering properties

Rs 10 /Kg

Rs 20 /Kg

Copper slag 0.1–0.5mm is a by-product of copper extraction that is formed during the smelting and refining of copper ore. It is a granular material that typically ranges in size from very fine particles (less than 0.1 mm) to coarse particles (up to 10 mm or more).

Rs 7 /Kg

Rs 10 /Kg

Solid copper slag Abrasive refers to the solidified form of copper slag that is obtained after the molten slag has cooled and solidified. Copper slag is a by-product of copper extraction and refining processes, and when it is initially generated, it is in a molten or liquid state.

Rs 3 /Kg

Rs 5 /Kg

Dry copper slag refers to copper slag that has been processed and dried to remove moisture content. Copper slag is initially obtained as a molten by-product during the copper smelting and refining process. It is then cooled and solidified before further processing.

Rs 5 /Kg

Rs 10 /Kg

Copper slag powder is a finely ground material that is obtained by further processing copper slag. Copper slag is a by-product of copper extraction and refining processes. After the molten copper slag is quenched in water or air, it is further processed by grinding it into a fine powder.

Rs 6 /Kg

Rs 10 /Kg

Copper slag grit is a by-product of copper extraction and refining processes. It is a granulated material that is produced by quenching molten copper slag in water or air, which results in a highly angular, dense, and hard material.

Rs 10 /Kg

Rs 15 /Kg

Alumina oxide powder, also known as aluminum oxide powder or alumina powder, is a fine white crystalline powder composed of aluminum oxide (Al2O3). It is widely used in various industries and applications due to its desirable properties.

Rs 90 /Kg

Rs 100 /Kg

Aluminum oxide grit refers to abrasive particles made from aluminum oxide, which is a compound of aluminum and oxygen (Al2O3). It is widely used as an abrasive material for various industrial applications, including grinding, sanding, polishing, and surface preparation.

Rs 80 /Kg

Rs 100 /Kg

Brown fused alumina is a type of fused aluminum oxide that is characterized by its brown color. It is produced by melting high-quality bauxite in an electric arc furnace at high temperatures. The process involves the fusion of the bauxite followed by cooling and solidification, resulting in a dense

Rs 80 /Kg

Rs 90 /Kg

White fused alumina is a type of fused aluminum oxide that is characterized by its white color and high purity. It is produced by melting high-quality aluminum oxide in an electric arc furnace at high temperatures, similar to the process used to produce brown fused alumina.

Rs 60 /Kg

Rs 80 /Kg

Fused aluminum oxide is widely used in various applications, including grinding, cutting, blasting, and polishing. It is a hard and durable material that has excellent chemical stability and resistance to corrosion. It is also heat-resistant, making it ideal for use in high-temperature applications.

Rs 30 /Kg

Rs 40 /Kg

Commercial aluminum oxide refers to aluminum oxide products that are commonly available and widely used in various industries. It encompasses a range of grades, sizes, and forms of aluminum oxide, depending on the intended application.

Rs 30 /Kg

Rs 40 /Kg

Rs 40 /Kg

Rs 50 /Kg

White aluminum oxide powder is a high-purity form of aluminum oxide that is made from the same raw materials as brown aluminum oxide, but with a different production process that results in a purer, more crystalline product. It is a white, odorless powder with high hardness & ideal thermal stability

Rs 90 /Kg

Rs 95 /Kg

Blue aluminum oxide is a type of aluminum oxide abrasive that is known for its hardness and toughness. It is produced by fusing a mixture of high-purity alumina and a small amount of chromium oxide in an electric arc furnace at very high temperatures.

Rs 40 /Kg

Rs 50 /Kg

Aluminum oxide powder, also known as alumina, is a white crystalline powder that is commonly used in various industries due to its physical & chemical properties. It is produced by refining bauxite ore through the Bayer process, & it is a primary raw material used in the production of aluminum metal

Rs 50 /Kg

Rs 55 /Kg

Granite cutting usually involves the use of diamond tools, such as diamond wire saws and diamond-tipped blades, rather than steel grit. Steel grit is more commonly used in shot blasting and surface preparation applications.

Rs 75 /Kg

Rs 85 /Kg

Industrial steel grit is a type of abrasive material used in various surface preparation and finishing applications such as shot blasting, sandblasting, and peening. It is made from crushed steel shot that is then tempered to increase its hardness and durability.

Rs 50 /Kg

Rs 80 /Kg

High Carbon Steel Grit is a type of abrasive media used for surface preparation, cleaning, and finishing of various metal surfaces. It is made from high carbon steel wire that is cut and then crushed into angular particles. High carbon steel grit is harder and more durable than low carbon steel grit

Rs 60 /Kg

Rs 80 /Kg

Low carbon steel grits are a type of abrasive media used in surface preparation and cleaning processes, such as shot blasting and peening. They are made from high-quality low carbon steel and are characterized by their angular shape and hardness.

Rs 60 /Kg

Rs 80 /Kg

G80 steel grit is a type of abrasive media used for surface preparation & cleaning of metal surfaces, mainly in applications that require a high degree of roughness. It is made by crushing hardened steel shot into angular particles, which are then heat-treated to achieve exact hardness & strength.

Rs 70 /Kg

Rs 85 /Kg

Mild steel grits are abrasive particles used for surface preparation & finishing. They are made from high-quality steel & are specially treated to have sharp edges. Mild steel grits are used for removing rust, paint, scale, & other coatings from metal surfaces, as well as for surface preparation.

Rs 65 /Kg

Rs 85 /Kg

Round steel grit is an abrasive media made from high-quality, tempered steel that is shaped into round particles through a process of crushing, screening, and conditioning. Round steel grit is used in shot blasting applications to remove rust, paint, and other coatings from metal surfaces.

Rs 80 /Kg

Rs 100 /Kg

G50 steel grits are abrasive particles used in shot blasting and surface preparation applications. They are made from high-quality alloy steel and are heat-treated to a hardness range of 56-60 HRC. The size of G50 steel grits ranges from 0.4 mm to 0.7 mm.

Rs 70 /Kg

Rs 85 /Kg

G120 Steel Grit is an abrasive media used in shot blasting & surface preparation applications. It is made of high-quality steel & has a hardness of 63-66 HRC, which makes it very durable & resistant to wear and impact. The G120 designation refers to the grit size from 0.125 mm to 0.2 mm.

Rs 65 /Kg

Rs 85 /Kg

G16 Steel Grit is a type of abrasive blasting media made from high-quality alloy steel with a carbon content of 0.8% to 1.2% by weight. It is commonly used for surface preparation, cleaning, and rust removal in various industries, including automotive, aerospace, and construction.

Rs 65 /Kg

Rs 85 /Kg

G10 Steel Grits are abrasive blasting media made of high-quality alloy steel, typically containing 0.8% to 1.2% carbon by weight. They are commonly used in surface preparation, rust removal, and cleaning applications in various industries, such as foundries, steel mills, and shipyards.

Rs 65 /Kg

Rs 85 /Kg

G12 Steel Grits are a specific size of cast steel grits, with an average particle size of 1.7 mm. They are commonly used for surface preparation and cleaning of metal surfaces, such as steel, cast iron, and other ferrous metals, prior to coating or painting.

Rs 65 /Kg

Rs 85 /Kg

Cast Steel Grits are a type of abrasive media used for surface preparation and cleaning in various industries such as foundries, steel mills, and metalworking industries. They are made by crushing and screening cast steel shots to obtain sharp-edged angular particles.

Rs 40 /Kg

Rs 50 /Kg

Chilled Iron Shot is a type of abrasive media used for surface preparation and cleaning in various industries such as foundries, steel mills, and metalworking industries. It is made by chilling molten iron in a water-cooled drum to create small, spherical particles with a smooth surface.

Rs 48 /Kg

Rs 50 /Kg

Chilled Iron Grits are abrasive media used for surface preparation and cleaning in various industries such as foundries, shipyards, steel mills, and other metalworking industries. Chilled Iron Grits are made by crushing chilled iron shot into irregular-shaped particles of various sizes.

Rs 48 /Kg

Rs 50 /Kg

Aluminum cut wire shot is an abrasive material used for surface cleaning and finishing. It is made by cutting aluminum wire into a specific shape and size using a machine, and then conditioning the shots to remove any sharp edges or burrs.

Rs 70 /Kg

Rs 85 /Kg

Zinc cut wire shots are a type of abrasive material used for surface cleaning, preparation, and finishing. They are made by cutting zinc wire into a specific shape and size using a machine, and then conditioning the shots to remove any sharp edges or burrs.

Rs 300 /Kg

Rs 380 /Kg

Cast steel shot is an abrasive material used for cleaning, surface preparation, and finishing applications. It is made by melting and casting high-quality steel into a specific shape and size, then conditioning the shot to remove any sharp edges or burrs.

Rs 65 /Kg

Rs 85 /Kg

Steel cut wire shot is an abrasive material used in various applications, such as surface cleaning, preparation, and finishing. It is made by cutting steel wire into a specific shape and size range, and then conditioned to remove any sharp edges or burrs.

Rs 80 /Kg

Rs 100 /Kg

Mild steel shot is a type of abrasive material used in various industrial applications, such as surface cleaning, preparation, and finishing. It is made from high-quality, low carbon steel and is processed to achieve a specific shape and size range.

Rs 65 /Kg

Rs 100 /Kg

Low carbon steel shots are a type of metallic abrasive material used in various industrial applications, such as surface cleaning, preparation, and finishing. They are made from high-quality, low carbon steel and are processed to achieve a specific shape and size range.

Rs 65 /Kg

Rs 85 /Kg

High carbon steel shots are a type of metallic abrasive material used for various industrial applications, such as surface cleaning, preparation, and finishing. They are made from high-quality, high carbon steel and are processed to achieve a specific shape and size range.

Rs 65 /Kg

Rs 85 /Kg

Stainless steel shot is a type of metallic abrasive material used in various industrial applications, such as surface cleaning, preparation, and finishing. It is made from high-quality stainless steel and is processed to achieve a specific shape and size range.

Rs 65 /Kg

Rs 100 /Kg

Brown garnet abrasive is a type of abrasive material made from natural garnet mineral that has been processed to a specific size range and shape for use in abrasive blasting applications. Brown garnet is known for its hardness, durability, & sharp edges, which make it an effective abrasive material

Rs 40 /Kg

Rs 45 /Kg

Garnet 80 mesh is a type of abrasive material made from natural garnet minerals that has been processed to a particle size range of 80 mesh. The mesh size represents the number of openings per linear inch in a sieve screen used to separate and classify the particle size of the garnet material.

Rs 30 /Kg

Rs 40 /Kg

Garnet 40-60 mesh is a type of abrasive material made from natural garnet mineral that has been processed to a particle size range of 40 to 60 mesh. The mesh size represents the number of openings per linear inch in a sieve screen used to separate & classify the particle size of the garnet material.

Rs 30 /Kg

Rs 40 /Kg

Garnet 30-60 mesh is a type of abrasive material made from natural garnet mineral that has been processed to a particle size range of 30 to 60 mesh. The term "mesh" refers to the number of openings per linear inch in a sieve screen used to separate & classify the particle size of the garnet material

Rs 30 /Kg

Rs 40 /Kg

Garnet 10/30 mesh is a type of abrasive material made from natural garnet media that has been processed to a particle size range of 10 to 30 mesh. The term "mesh" refers to the number of openings per linear inch in a sieve screen used to separate and classify the particle size of the garnet material

Rs 30 /Kg

Rs 40 /Kg

Garnet 20-60 mesh is a type of abrasive material made from natural garnet media that has been processed to a particle size range of 20 to 60 mesh. The term "mesh" refers to the number of openings per linear inch in a sieve screen used to separate & classify the particle size of the garnet material.

Rs 30 /Kg

Rs 40 /Kg

Garnet 20-40 mesh is a type of abrasive material made from natural garnet media that has been processed to a particle size range of 20 to 40 mesh. The term "mesh" refers to the number of openings per linear inch in a sieve screen used to separate & classify the particle size of the garnet material.

Rs 30 /Kg

Rs 40 /Kg

Garnet 12-24 mesh is a type of abrasive material made from natural garnet media that has been processed to a particle size range of 12 to 24 mesh. The term "mesh" refers to the number of openings per linear inch in a sieve screen used to separate & classify the particle size of the garnet material.

Rs 30 /Kg

Rs 40 /Kg

Garnet 10-20 mesh refers to a type of abrasive material made from natural garnet media that has been processed to a particle size range of 10-20 mesh. The term "mesh" refers to the number of openings per linear inch in a sieve screen used to separate & classify particle size of the garnet material.

Rs 50 /Kg

Rs 60 /Kg

Titanium silicon carbide powder is a composite material made from titanium carbide (TiC) and silicon carbide (SiC). This material has high wear resistance, high strength, and excellent thermal conductivity, making it suitable for use in a variety of applications.

Rs 10 /Kg

Rs 20 /Kg

Silicon carbide powder 300 mesh is a fine powder made from silicon and carbon with a particle size of 300 mesh or smaller. The mesh size refers to the number of openings per inch in a screen used to classify the particle size of the powder. In general, the smaller the mesh size, the finer the powder

Rs 90 /Kg

Rs 100 /Kg

Silicon carbide powder 500 mesh is a fine powder made from silicon & carbon with a particle size of 500 mesh or smaller. The mesh size refers to the number of openings per inch in a screen used to classify the particle size of the powder. In general, the smaller the mesh size, the finer the powder.

Rs 85 /Kg

Rs 90 /Kg

Silicon carbide powder 400 mesh is a fine powder made from silicon & carbon with a particle size of 400 mesh or smaller. The mesh size refers to the number of openings per inch in a screen used to classify the particle size of the powder. In general, the smaller the mesh size, the finer the powder.

Rs 80 /Kg

Rs 85 /Kg

120 silicon carbide powder is a type of abrasive material that is commonly used in various industrial applications, such as grinding, polishing, and lapping. It is made from a combination of silicon and carbon, with the addition of small amounts of other elements, such as iron and aluminum.

Rs 70 /Kg

Rs 75 /Kg

Black silicon carbide powder is a type of abrasive material that is commonly used in various industrial applications, such as grinding, cutting, and polishing. It is made from a combination of silicon and carbon, with the addition of small amounts of other elements, such as iron and aluminum,

Rs 70 /Kg

Rs 75 /Kg

Foundry grade silicon carbide (SiC) is a type of abrasive material that is commonly used in the foundry industry for various applications, including the production of metal castings. It is made from a combination of silicon and carbon, with the addition of small amounts of other elements,

Rs 60 /Kg

Rs 65 /Kg

Green silicon carbide grit is a type of abrasive media that is used in various industrial applications, such as grinding, cutting, & polishing. It is made from a blend of silicon & carbon, with the addition of small amounts of aluminum oxide & other elements that give it its distinctive green color.

Rs 85 /Kg

Rs 90 /Kg

Blue silicon carbide grit is a type of abrasive media that is used in various industrial applications, such as grinding, cutting, & polishing. It is made from a variety of silicon & carbon, with the addition of small amounts of iron, copper, & other elements that give it its distinctive blue color.

Rs 50 /Kg

Rs 60 /Kg

Aluminum silicon carbide (AlSiC) is a composite material made from a mixture of aluminum, silicon, and silicon carbide particles. The material has a unique combination of properties that make it ideal for use in various industrial and electronic applications.

Rs 10 /Kg

Rs 20 /Kg

Black silicon carbide is a type of abrasive material that is commonly used in various industrial applications. It is made from a combination of silicon and carbon, and it is formed by heating a mixture of quartz sand and petroleum coke at high temperatures in an electric resistance furnace.

Rs 85 /Kg

Rs 100 /Kg

A Grade feldspar powder is a high-quality feldspar powder that is carefully processed & graded to ensure that it meets certain quality standards. The exact specifications for A Grade feldspar powder may vary depending on the specific application, but it typically has a high purity and a consistent

Rs 4 /Kg

Rs 7 /Kg

Feldspar mineral powder is a type of mineral powder that is composed of aluminum silicate & various cations, including potassium, sodium, calcium, & barium. Feldspar is a common mineral that can be found in many rocks, such as granite, gneiss, and pegmatite, and is widely used in various industries.

Rs 3 /Kg

Rs 7 /Kg

Feldspar 100 mesh powder is a type of mineral powder that is composed of aluminum silicate and various cations, including potassium, sodium, calcium, and barium. It is a common mineral that can be found in many rocks, such as granite, gneiss, and pegmatite, and is widely used in various industries.

Rs 4 /Kg

Rs 7 /Kg

Powdered grey potash feldspar powder is a type of mineral powder that is composed of aluminum silicate and potassium. It is a common mineral that can be found in many rocks, such as granite and gneiss, and is widely used in various industries.

Rs 3 /Kg

Rs 7 /Kg

200 mesh feldspar powder is a type of mineral powder that has been ground to a specific particle size. The term "mesh" refers to the number of openings per linear inch in a sieve through which the powder can pass. A 200 mesh feldspar powder means that the powder has been ground to a particle size of

Rs 3 /Kg

Rs 7 /Kg

Powdered white feldspar powder is a fine-grained mineral powder that is composed of aluminum silicate and various cations, such as sodium, potassium, calcium, and barium. It is a common mineral that can be found in many rocks, such as granite and gneiss, and is widely used in various industries.

Rs 3 /Kg

Rs 7 /Kg

Off-white feldspar powder is a type of mineral powder that is composed of aluminum silicate and various cations, such as sodium, potassium, calcium, and barium. It is a common mineral that can be found in many rocks, such as granite and gneiss, and is widely used in various industries.

Rs 3 /Kg

Rs 7 /Kg

White potash feldspar powder is a type of mineral powder that is composed primarily of aluminum silicate and potassium. It is a common mineral that can be found in many rocks, such as granite and gneiss, and is widely used in various industries.

Rs 3 /Kg

Rs 7 /Kg

Commercial feldspar powder is a type of mineral powder that is composed of aluminum silicate and various cations, such as sodium, potassium, calcium, and barium. It is a common mineral that can be found in many rocks, such as granite and gneiss and is widely used in various industries.

Rs 3 /Kg

Rs 7 /Kg

Calcium feldspar powder is a type of mineral powder that is composed of aluminum silicate and calcium. It is a common mineral that can be found in many rocks, such as granite and gneiss and is widely used in various industries.

Rs 3 /Kg

Rs 7 /Kg

Barium Feldspar is formed when barium replaces potassium in the mineral structure. Barium feldspars are classified as a different group of feldspars at times, and as a subgroup of alkali feldspars at others. The mineral is discovered in contact with metamorphic rocks rich in barium.

Rs 3 /Kg

Rs 7 /Kg

Sodium feldspar powder is a type of mineral powder that is composed of aluminum silicate and sodium. It is a common mineral that can be found in many rocks, such as granite and gneiss, and is widely used in various industries.

Rs 3 /Kg

Rs 7 /Kg

Soda feldspar powder is a type of mineral powder that is composed of aluminum silicate and sodium. It is a common mineral that can be found in many rocks, such as granite and gneiss and is widely used in various industries.

Rs 3 /Kg

Rs 7 /Kg

Potash feldspar powder is a type of mineral powder that is composed of aluminum silicate and potassium. It is a common mineral that can be found in many rocks, such as granite and gneiss and is widely used in various industries.

Rs 3 /Kg

Rs 7 /Kg

White feldspar powder is a type of mineral powder that is composed of aluminum silicate and potassium, sodium, or calcium. It is a common mineral that can be found in many rocks, such as granite and gneiss and is widely used in various industries.

Rs 3 /Kg

Rs 7 /Kg

Ultra Bentonite Powder is a type of Bentonite clay that has been processed to achieve a finer particle size & higher purity. Bentonite clay is a naturally occurring clay that is composed mainly of montmorillonite, a type of clay mineral that has a unique molecular structure that gives it its benefit

Rs 3 /Kg

Rs 5 /Kg

Foundry Grey Bentonite Powder is a type of Bentonite clay that is used as a binder in the foundry industry for molding & casting metal parts. Bentonite clay is a naturally occurring clay that is composed primarily of montmorillonite, a type of clay mineral that has a unique structure that gives it.

Rs 2 /Kg

Rs 5 /Kg

Natural Sodium Bentonite is a type of Bentonite clay that is composed primarily of sodium ions & has a unique molecular structure that gives it its beneficial properties. Bentonite clay is a naturally occurring clay that is formed from volcanic ash & has been used for centuries for its therapeutic

Rs 3 /Kg

Rs 5 /Kg

Natural Calcium Bentonite is a type of Bentonite clay that is formed mainly of calcium ions & has a unique molecular structure that gives it its beneficial properties. Bentonite clay is a naturally occurring clay that is formed from volcanic ash & has been used for centuries for its therapeutic

Rs 3 /Kg

Rs 5 /Kg

Potassium Bentonite is a type of Bentonite clay that contains a high percentage of potassium ions. Bentonite clay is a naturally occurring clay that is composed of volcanic ash and has a unique structure that gives it its beneficial properties.

Rs 3 /Kg

Rs 5 /Kg

Bentonite clay is a type of clay that is formed of volcanic ash that has undergone weathering & other natural processes over time. Clay is named after Fort Benton, Wyoming, where it was first discovered. Bentonite clay is known for its unique properties, including high absorbency, swelling capacity

Rs 3 /Kg

Rs 5 /Kg

Earthing Bentonite Powder is a type of Bentonite clay powder that is used in grounding or earthing applications. Grounding or earthing is a technique used to connect electrical systems to the earth, which helps to protect the systems from damage caused by lightning strikes, power surges, and others.

Rs 2 /Kg

Rs 5 /Kg

Sodium Bentonite Clay Powder is a type of Bentonite clay that contains a high percentage of sodium ions. Bentonite clay is a naturally occurring clay that is composed of volcanic ash and has a unique structure that gives it its beneficial properties.

Rs 2 /Kg

Rs 5 /Kg

Calcium Bentonite Clay Powder is a type of Bentonite clay that contains a high percentage of calcium ions. Bentonite clay is a naturally occurring clay that is composed of volcanic ash and has a unique structure that gives it its beneficial properties.

Rs 3 /Kg

Rs 5 /Kg

White Bentonite Powder is a type of Bentonite clay that has a white color. The color of the Bentonite powder can vary depending on the source of the mineral, as well as its mineral composition and the presence of impurities.

Rs 2 /Kg

Rs 5 /Kg

Micronized Bentonite Powder is a type of Bentonite clay that has been processed into a very fine powder, typically with a particle size of less than 10 microns. The micronization process involves grinding the Bentonite clay into a fine powder, which increases its surface area and makes it easier to

Rs 2 /Kg

Rs 5 /Kg

Paper Bentonite Powder is a type of Bentonite clay that is commonly used in the papermaking process as a coating and filler material. It is made by finely grinding Bentonite clay and processing it to remove impurities and increase its purity.

Rs 3 /Kg

Rs 5 /Kg

Brown Bentonite Powder is a type of Bentonite clay that has a brown color. The color of the Bentonite powder can vary depending on the source of the mineral, as well as its mineral composition and the presence of impurities.

Rs 2 /Kg

Rs 5 /Kg

Yellow Bentonite Powder refers to a type of Bentonite clay that has a yellowish or golden color. The color of the Bentonite powder can vary depending on the source of the mineral, as well as its mineral composition and the presence of impurities.

Rs 2 /Kg

Rs 5 /Kg

High viscosity Bentonite powder refers to Bentonite clay material that has a high resistance to flow or deformation & is characterized by a thick, sticky consistency. Viscosity of Bentonite powder depends on various factors, including the source of mineral, its particle size, & the presence of other

Rs 2 /Kg

Rs 5 /Kg

Calcite Powder 500 Mesh is an ultra-fine powder that is derived from the calcite mineral, which is composed of calcium carbonate. This fine powder has been ground to a size where 90% of the particles can pass through a mesh screen with 500 holes per linear inch.

Rs 8 /Kg

Rs 10 /Kg

250 mesh calcite powder is a type of fine powder that has been ground from calcite mineral to a size where 90% of the particles can pass through a mesh screen with 250 holes per linear inch. This type of powder is used in various industrial applications, such as in the production of paints, coating

Rs 2 /Kg

Rs 5 /Kg

400 Mesh Calcite Powder is a type of fine powder that has been ground from calcite mineral to a size where 90% of the particles can pass through a mesh screen with 400 holes per linear inch. This type of powder is used in various industrial applications, such as in the production of paints, coatings

Rs 4 /Kg

Rs 5 /Kg

200 mesh calcite powder is a type of fine powder made from calcite mineral that has been ground to a size where 90% of the particles can pass through a mesh screen with 200 holes per linear inch. This type of powder is commonly used in various industrial applications, such as in the production

Rs 3 /Kg

Rs 5 /Kg

100 Mesh Calcined Powder is a form of fine powder that has been calcined, which means it has been heated to a high temperature to remove impurities and improve its properties. The term "100 mesh" refers to the size of the particles in the powder, with each particle being small enough to pass through

Rs 3 /Kg

Rs 5 /Kg

Calcined Mica Powder is a form of mica that has been heated to a high temperature, typically between 800°C & 1000°C, in order to draw impurities & improve its properties. It is a white, powder that is used in industrial applications, such as in the exhibit of paint coatings, plastics, rubber product

Rs 95 /Kg

Rs 100 /Kg

A boiler dust bag filter cage is a type of support structure used to hold filter bags in place within dust collection systems in boilers.

Rs 700

Rs 900

An air collector filter bag cage is a type of support structure used to hold filter bags in place in air filtration systems.

Rs 650

Rs 950

An industrial dust collector bag filter cage is a type of support structure used to hold filter bags in place within dust collection systems.

Rs 600

Rs 900

A dust collector cage is a type of support structure used in industrial dust collection systems. They are designed to hold filter bags in place within the dust collector.

Rs 450

Rs 600

A filter bag cage is a type of support structure used to hold filter bags in place in industrial applications. They come in a variety of shapes and sizes.

Rs 250

Rs 500

An oval bag filter cage is a type of support structure used to hold filter bags in place in industrial applications.

Rs 600

Rs 600

High temperature filter bags are specially designed to withstand extreme temperatures in industrial applications. Made from materials such as fiberglass or PTFE.

Rs 500

Rs 500

Filler Calcite Powder is a form of calcium carbonate that is used as the filler material in various industrial applications. It is a white, odorless powder that is commonly used in industries such as plastics, paints, coatings, paper, and adhesives.

Rs 3 /Kg

Rs 5 /Kg

Green Calcite Powder is a natural form of calcium carbonate that is characterized by its greenish color. It is a soft, fine powder that is commonly used in the field of metaphysics and healing, as well as in the production of industrial products.

Rs 4 /Kg

Rs 5 /Kg

Emery powder is a coarse, dark-colored abrasive material that is commonly used in industrial applications such as metalworking and woodworking.

Rs 12 /Kg

Rs 12 /Kg

Micronized Calcite Powder is a natural form of calcium carbonate that has been processed to achieve a very fine particle size. It is a white, odorless powder that is commonly used in various applications, such as in the production of paints, coatings, plastics, and ceramics.

Rs 5 /Kg

Rs 7 /Kg

Zircon sand is a naturally occurring mineral that contains high levels of zirconium and titanium. It is commonly used in the production of ceramics, refractories, and foundry molds due to its excellent thermal and chemical stability.

Rs 125 /Kg

Rs 125 /Kg

Yellow Calcite Powder is a natural form of calcium carbonate that is characterized by its yellowish color. It is a soft, fine powder that is commonly used in the field of metaphysics and healing, as well as in the production of industrial products.

Rs 3 /Kg

Rs 5 /Kg

Natural Calcite Powder is a form of calcium carbonate that is derived from natural sources, such as limestone or marble. It is a white, odorless powder that is commonly used in various industries, such as construction, pharmaceuticals, and agriculture.

Rs 2 /Kg

Rs 3 /Kg

White Calcite Powder is a natural form of calcium carbonate that is commonly used in a variety of applications, such as in the production of paints, coatings, plastics, and ceramics. It is a white, odorless powder that is produced by grinding limestone or marble.

Rs 3 /Kg

Rs 4 /Kg

Calcite Powder is a natural form of calcium carbonate that is widely used in a variety of industries, such as construction, pharmaceuticals, and agriculture. It is a white, odorless powder that is produced by grinding limestone or marble.

Rs 2 /Kg

Rs 3 /Kg

Non-woven fiber glass filter bags are designed to capture fine particulate matter such as dust, smoke, and fumes. These bags are made from high-quality fiber glass material that is durable and resistant to high temperatures.

Rs 600

Rs 600

Snap type fiber glass filter bags are commonly used in high-temperature applications such as incineration, cement production, and power generation.

Rs 600

Rs 600

SFI (Seamless Filter Integrity) collar type fiber glass filter bags are used in various industries to capture fine particulate matter such as dust and soot.

Rs 600

Rs 600

FBC (Fluidized Bed Combustion) boiler filter bags are designed to capture and remove contaminants such as ash, dust, and other particulate matter that can be found in the combustion gases produced by FBC boilers.

Rs 600

Rs 600

Boiler filter bags are essential components of boilers used in various industries such as power generation, food processing, pharmaceuticals, and more.

Rs 600

Rs 600

Pond Fly Ash Powder is a type of industrial waste that is generated from coal-fired power plants. It is the fine powder that is collected from the flue gas during combustion and is typically stored in large ponds or landfills.

Rs 3 /Kg

Rs 5 /Kg

Fine fly ash powder is a type of fly ash that is characterized by its small particle size and high fineness. The particle size of fine fly ash is typically less than 10 microns, and it has a high specific surface area, which allows it to react more readily with cement in concrete mixtures.

Rs 3 /Kg

Rs 5 /Kg

Cement fly ash powder is a type of powder that is made by blending cement with fly ash. Fly ash is a byproduct of coal combustion in power plants and is collected from the flue gases by electrostatic precipitators or other mechanical means. It is a supplementary cementitious material (SCM) that can

Rs 3 /Kg

Rs 5 /Kg

Class C fly ash powder is a type of fly ash that is produced by burning sub-bituminous or lignite coal in power plants. It is a byproduct of the combustion process and is collected from the flue gases by electrostatic precipitators or other mechanical means.

Rs 3 /Kg

Rs 5 /Kg

Class F fly ash powder is a kind of fly ash that is made by burning anthracite or bituminous coal in power plants. It is a byproduct of the combustion process and is collected from the flue gases by electrostatic precipitators or other mechanical means.

Rs 3 /Kg

Rs 5 /Kg

High Volume Fly Ash powder is a byproduct of coal combustion in power plants. Fly ash is collected from the flue gases by electrostatic precipitators or other mechanical means. HVFA powder is a type of fly ash that is used as a supplementary cementitious material (SCM) in concrete.

Rs 3 /Kg

Rs 5 /Kg

Coal fly ash powder is a fine material made during coal combustion in thermal power plants. Electrostatic precipitators or baghouses collect it & can be used in various applications. Coal fly ash powder is composed of silica, alumina, & iron oxide, calcium, magnesium, & other trace elements.

Rs 3 /Kg

Rs 5 /Kg

Ceramic fly ash powder is a type of fly ash that has been processed & remade into a ceramic material via high-temperature firing. It is produced by mixing fly ash with other ceramic raw materials such as clay, feldspar, & quartz, then sintering the mixture at high temperatures of around 1200-1400°C.

Rs 3 /Kg

Rs 5 /Kg

Dry fly ash powder is a fine powdery material that is generated as a byproduct from the combustion of coal in thermal power plants. It is collected by electrostatic precipitators or baghouses and can be processed and sold as a valuable material.

Rs 2 /Kg

Rs 5 /Kg

Molybdenum disulfide powder (MoS2) is a grayish-black powder composed of molybdenum and sulfur atoms. It is naturally occurring and is one of the most common forms of molybdenum. MoS2 has a layered crystal structure, where molybdenum atoms are sandwiched between layers of sulfur atoms.

Rs 60 /Kg

Rs 100 /Kg

Nano molybdenum powder is a fine powder composed of molybdenum atoms that have been reduced to nanoscale dimensions, typically ranging from 1 to 100 nanometers in size. It is typically produced by physical or chemical methods such as ball milling, plasma spraying, or chemical reduction.

Rs 80 /Kg

Rs 100 /Kg

Molybdenum oxide powder is a fine, white powder composed of molybdenum and oxygen atoms. It is typically produced by roasting molybdenum sulfide or molybdenum concentrate at high temperatures to convert it to molybdenum oxide.

Rs 80 /Kg

Rs 100 /Kg

Woven fiber glass filter bags are commonly used in industrial filtration applications to remove dust and other particles from gases and liquids.

Rs 700

Rs 700

Ferro molybdenum powder is a powdered alloy composed of iron and molybdenum. It typically contains between 60-75% molybdenum by weight, with the remaining portion being iron and other trace elements.

Rs 80 /Kg

Rs 100 /Kg

Molybdenum metal powder is a fine, metallic powder composed of molybdenum atoms. It is typically produced by reducing molybdenum oxide or molybdenum trioxide with hydrogen gas or carbon at high temperatures, followed by milling and sieving to obtain a desired particle size distribution.

Rs 80 /Kg

Rs 100 /Kg

Glass fiber filter bags are a popular choice for industrial air filtration systems. These bags are made of high-quality glass fiber material.

Rs 400

Rs 400

Power plant filter bags are critical components of air pollution control systems in power plants. These bags are designed to capture and remove fine dust particles and other contaminants from flue gas emissions.

Rs 700

Rs 700

Fiberglass filter bags are a common type of filter bag used in industrial dust collection systems. These bags are made from high-quality fiberglass material, which can withstand high temperatures and harsh operating conditions.

Rs 750

Rs 750

Filter spray dryer bags are an essential component of spray drying systems used in various industries. These bags are made of high-quality filter media that can efficiently capture fine particles and prevent contamination.

Rs 400

Rs 400

Fine molybdenum powder refers to a finely divided form of molybdenum metal, typically with a particle size ranging from a few micrometers to several tens of micrometers. It is produced by various methods, including chemical reduction of molybdenum compounds, mechanical milling, and

Rs 80 /Kg

Rs 100 /Kg

Double snap fiberglass filter bags are an advanced type of filter bag used in industrial dust collection systems. These bags are made from high-quality fiberglass material and feature two snap rings for easy installation and removal.

Rs 700

Rs 700

Filter bags are essential components of industrial dust collection systems, used to capture and remove airborne dust particles from various processes.

Rs 600

Rs 600

Molybdenum carbide powder is a compound composed of molybdenum and carbon, with the chemical formula Mo2C or MoC. It is a gray or black powder that is insoluble in water and has a high melting point and excellent thermal stability.

Rs 80 /Kg

Rs 100 /Kg

Dry molybdenum powder refers to a finely divided form of molybdenum metal that is free from any added liquids or solvents. It is typically produced by reducing molybdenum oxide or molybdenum trioxide with hydrogen gas or carbon at high temperatures, followed by milling and sieving to obtain

Rs 80 /Kg

Rs 100 /Kg

Ammonium molybdenum powder is a compound made up of ammonium and molybdenum, with the chemical formula (NH4)6Mo7O24. It is a yellow or greenish-yellow powder that is soluble in wetness and often used as a source of molybdenum in the manufacture of fertilizers, catalysts, and other chemical products.

Rs 80 /Kg

Rs 100 /Kg

Pure molybdenum powder is a finely divided form of molybdenum metal, which is known for its high melting point, excellent corrosion resistance, and good electrical and thermal conductivity. It is commonly used in the production of various alloys, such as steel, superalloys, and non-ferrous alloys

Rs 80 /Kg

Rs 100 /Kg

A mechanism for recovering your abrasive material and an enclosure that keeps fine abrasive material from accessing the outside air make up a blast room. The leftover abrasive is sent to a recovery system once it has been recovered so that dust may be separated from the leftovers and the high-qualit

Rs 5000000

Rs 5000000

Acoustic Chamber Dust Collector

Rs 200000

Rs 200000

Acoustic Chamber

Rs 200000

Rs 200000

Online Zinc Spray Booth

Rs 200000

Rs 200000

The Spray Booth is set up immediately following the welding work station. Inside the Spray Booth is where the Arc Spray Gun is situated.

Rs 1500000

Rs 1500000

Burnt lime powder, also known as quicklime powder, is a fine-grained powder made from the calcination of limestone or other calcium carbonate-containing materials. Calcination process involves heating the raw material to high temperatures (800°C) in a lime kiln to produce quicklime (calcium oxide).

Rs 6 /Kg

Rs 10 /Kg

White industrial quick lime powder is a fine powder made from the calcination of limestone. Quicklime, also known as calcium oxide (CaO), is produced by heating limestone to high temperatures in a lime kiln. The resulting quicklime is then crushed into a fine powder.

Rs 7 /Kg

Rs 10 /Kg

White natural limestone powder is a fine-grained powder made from natural white limestone rocks. Limestone is a sedimentary rock composed primarily of calcium carbonate, and the white color of the limestone is usually due to the absence of impurities such as iron oxide minerals.

Rs 2 /Kg

Rs 5 /Kg

Pink limestone powder is a type of fine-grained powder made from natural pink limestone rocks. Limestone is a sedimentary rock formed mainly of calcium carbonate & can have various colors based on the minerals present in it. Pink limestone gets its color from presence of iron oxide minerals in rock.

Rs 3 /Kg

Rs 5 /Kg

Brown limestone powder is a fine-grained powder made from natural brown limestone rocks. Limestone is a sedimentary rock that is composed primarily of calcium carbonate. Color of limestone powder can vary from light beige to dark brown depending on the composition of the rock from which it is made.

Rs 2 /Kg

Rs 5 /Kg

White limestone powder directs to a fine powder made from limestone, which is a sedimentary rock composed mostly of calcium carbonate (CaCO3). Limestone is typically white or gray in color, hence the name white limestone powder. Powder is produced by crushing & grinding limestone into a powder form.

Rs 4 /Kg

Rs 5 /Kg

Dolomite powder 450 mesh refers to a fine powder made from dolomite mineral, which is a type of carbonate rock composed of calcium magnesium carbonate (CaMg(CO3)2). The term "mesh" refers to the number of openings per linear inch in a screen through which the powder is passed.

Rs 3 /Kg

Rs 5 /Kg

100 mesh dolomite powder refers to a fine powder made from dolomite mineral, which is a type of carbonate rock composed of calcium magnesium carbonate (CaMg(CO3)2). The term "mesh" refers to the number of openings per linear inch in a screen through which the powder is passed.

Rs 1 /Kg

Rs 5 /Kg

200 mesh dolomite powder refers to a fine powder made from dolomite mineral, which is a type of carbonate rock composed of calcium magnesium carbonate (CaMg(CO3)2). The term "mesh" refers to the number of openings per linear inch in a screen through which the powder is passed.

Rs 2 /Kg

Rs 5 /Kg

Dolomite powder with an 800 mesh size means that the powder particles will pass through a sieve with 800 mesh openings per inch. This mesh size corresponds to a particle size of approximately 15 microns.

Rs 5 /Kg

Rs 5 /Kg

Dolomite powder 150 mesh size means that the powder particles will pass through a sieve with 150 mesh openings per inch. This mesh size corresponds to a particle size of approximately 100 microns.

Rs 2 /Kg

Rs 5 /Kg

Dolomite powder with a 400 mesh size means that the powder particles will pass through a sieve with 400 mesh openings per inch. This mesh size corresponds to a particle size of approximately 37 microns.

Rs 2 /Kg

Rs 4 /Kg

Dolomite powder with a 500 mesh size means that the powder particles will pass through a sieve with 500 mesh openings per inch. This mesh size corresponds to a particle size of approximately 25 microns.

Rs 2 /Kg

Rs 4 /Kg

Dolomite powder with the 300 mesh size means that the powder particles will pass through a sieve with 300 mesh openings per inch. This mesh size corresponds to a particle size of approximately 50 microns.

Rs 3 /Kg

Rs 5 /Kg

Dolomite mesh powder refers to dolomite powder that has been sieved to a particular mesh size. Mesh size refers to the number of openings per linear inch in a screen or sieve. The higher the mesh number, the finer the particles that can pass through the sieve.

Rs 3 /Kg

Rs 5 /Kg

Dry dolomite powder is a type of industrial dolomite powder that has a low moisture content, typically less than 1%. It is produced by crushing and grinding dolomite rocks and then drying them to remove any moisture present in the material.

Rs 3 /Kg

Rs 5 /Kg

Black dolomite powder is a type of industrial dolomite powder that has a dark grey or black color due to the presence of impurities and other minerals. It is produced by crushing and grinding dolomite rocks and then screening them to the desired particle size.

Rs 3 /Kg

Rs 5 /Kg

Glass beads size AF is a specific type of glass bead that is commonly used in surface preparation and cleaning applications. The "AF" designation refers to the particle size of the glass beads.

Rs 120 /Kg

Rs 120 /Kg

Natural dolomite powder is a type of industrial mineral powder that is derived from the natural rock mineral, dolomite. Dolomite is a carbonate mineral consisting of calcium magnesium carbonate (CaMg(CO3)2) that is found in sedimentary rocks.

Rs 3 /Kg

Rs 5 /Kg

Calcined dolomite powder is a type of industrial dolomite powder that is produced by heating raw dolomite rocks at high temperatures (above 1000°C) to remove impurities and carbon dioxide (CO2) from the material. This process is also known as calcination.

Rs 3 /Kg

Rs 4 /Kg

Glass beads size AD is a specific type of glass bead that is commonly used in surface preparation and cleaning applications. The "AD" designation refers to the particle size of the glass beads.

Rs 120 /Kg

Rs 120 /Kg

Grey dolomite powder is a type of industrial dolomite powder that has a greyish color due to the presence of impurities and other minerals. It is produced by crushing and grinding dolomite rocks and then screening them to the desired particle size.

Rs 3 /Kg

Rs 5 /Kg

Glass beads size A is a specific size classification of glass beads used for abrasive blasting and surface preparation applications. The "A" designation refers to the range of particle size distribution of the glass beads, which typically fall between 0.020 and 0.025 inches in diameter.

Rs 120 /Kg

Rs 120 /Kg

Fine dolomite powder is another form of industrial dolomite powder that is finely ground with a particle size range of 100 to 500 mesh. It is produced by further processing and refining the dolomite powder to finer particle size, resulting in a smoother texture & more uniform particle distribution.

Rs 3 /Kg

Rs 5 /Kg

Micro dolomite powder is a finely ground form of industrial dolomite powder, typically with particle sizes ranging from 1 to 50 microns. It is produced by further grinding and processing industrial dolomite powder, resulting in a more uniform and consistent particle size distribution.

Rs 3 /Kg

Rs 5 /Kg

Steel grit G40 is a specific type of abrasive material commonly used in surface preparation and cleaning applications. t is commonly used for removing rust, scale, and other surface contaminants from metal surfaces, as well as for surface preparation prior to coating or painting.

Rs 100 /Kg

Rs 105 /Kg

Steel grit G18 is a specific type of abrasive material commonly used in surface preparation and cleaning applications.

Rs 100 /Kg

Rs 100 /Kg

Industrial dolomite powder is a type of mineral powder that is produced from dolomite rocks. Dolomite is a carbonate mineral composed of calcium magnesium carbonate (CaMg(CO3)2). Industrial dolomite powder is typically used in type of industries, such as construction, ceramics, glass, & agriculture.

Rs 3 /Kg

Rs 5 /Kg

Steel grit G25 is a specific type of abrasive material that is commonly used for surface preparation and cleaning in various industries. It is a high-performance steel grit made from high-quality steel that has been tempered to a specific hardness.

Rs 100 /Kg

Rs 100 /Kg

Yellow dolomite powder is a specific type of dolomite powder that has a yellowish hue. It is made from natural dolomite rock that has been crushed, ground, and processed to produce a fine powder with a consistent particle size distribution.

Rs 3 /Kg

Rs 5 /Kg

Stainless steel grit is a type of abrasive material used for surface preparation and cleaning in various industries. It is made from high-quality stainless steel and is used for shot blasting, peening, and other surface treatment applications.

Rs 100 /Kg

Rs 100 /Kg

White dolomite powder is a specific type of dolomite powder that is known for its white color and high purity. It is made from natural dolomite rock that has been crushed, ground, and processed to produce a fine powder with a consistent particle size distribution.

Rs 3 /Kg

Rs 5 /Kg

Dolomite powder is a type of mineral powder made from the sedimentary rock known as dolomite. Dolomite is a naturally occurring mineral that is composed of calcium magnesium carbonate (CaMg(CO3)2). The powder is usually white or off-white in color and has a fine particle size distribution.

Rs 3 /Kg

Rs 5 /Kg

The Powder Feeder MPF 700 is a volumetric powder feeder that is capable of dispensing a wide range of powdered materials, including metal powders, ceramics, and plastics. The feeder consists of a hopper, a feeding screw, and a control system that regulates the flow rate of the powder.

Rs 300000

Rs 325000

Powder feeders come in various forms and designs, ranging from simple gravity-fed systems to more complex pneumatic and mechanical feeders. Some powder feeders use a screw or auger to move the powder, while others use a rotary valve or fluidized bed to control the flow of powder.

Rs 300000

Rs 325000

Metal spray gun is a handheld tool that is used to spray a wide range of coatings, including paints, varnishes, and other liquids, onto a surface. These spray guns are used in industrial sets, such as in automotive refinishing & metal finishing applications, as well as in construction improvement.

Rs 50000

Rs 55000

An electric arc spray gun is a type of thermal spray gun that uses an electric arc to melt the material being sprayed onto a substrate. The process involves passing an electric current between two wires, which melts the wire material & then atomizes it into fine droplets that are propelled toward

Rs 550000

Rs 600000

The Powder Flame Spray Gun 6 PM-II is a thermal spray gun similar to the 5 PM-II, but with some improvements and modifications to its design. This gun is also used for the application of coatings to various surfaces using powdered materials and a flame as the heat source.

Rs 45000

Rs 50000

A reverse pulse jet dust collector is a type of air pollution control equipment used to collect and filter airborne particulate matter, such as dust, from industrial processes.

Rs 1000000 /Kg

Rs 1000000 /Kg

The Powder Flame Spray Gun 5 PM-II is a thermal spraying device used for applying coatings to various surfaces. It is designed to use powdered materials as the coating material and uses a flame as the heat source to melt the powder particles, which are then propelled onto the surface being coated.

Rs 45000

Rs 50000

A welding fume dust collector is a type of air pollution control equipment used to collect and filter airborne particulate matter, such as welding fumes, from industrial processes.

Rs 150000 /Kg

Rs 150000 /Kg

The Twin Wire Arc Spray Gun is a type of thermal spray gun used for applying protective coatings to metal surfaces. It uses two wire feedstocks, typically made of metals or alloys, which are fed into the gun and melted by an electric arc.

Rs 650000

Rs 700000

A pleated filter dust collector is a type of air pollution control equipment used to collect and filter airborne particulate matter, such as dust, from industrial processes.

Rs 2000000 /Kg

Rs 2000000 /Kg

A motorized shaking dust collector is a type of air pollution control equipment used to collect and filter airborne particulate matter, such as dust, from industrial processes. It contains a series of fabric filter bags that trap dust particles as they pass through the unit.

Rs 100000 /Kg

Rs 100000 /Kg

A fabric bag dust collector is a type of air pollution control equipment used to collect and filter airborne particulate matter, such as dust, from industrial processes.

Rs 499999 /Kg

Rs 500000 /Kg

14M Wire Flame Spray Gun is a lightweight spray gun that draws wire in, melts it with fuel gas, & blasts the molten particles onto the substrate using an air turbine. This flexible rifle features a mid wire feed thumb trigger & is ideal for hand-held use. It's used to cover metals & metal alloys.

Rs 90000

Rs 100000

A reverse pulse jet cylinder filter dust collector is a kind of air pollution control equipment used to store and filter airborne particles like dust, from industrial operation.

Rs 2000000 /Kg

Rs 2000000 /Kg

One of the best handguns for spray painting with metalizing wires is the 12M Wire Flame Spray Gun. It has a forged-aluminum universal gas head that may be converted to use any fuel gas. The Wire Flame Spray Gun is configured to spray 1/8" wire with acetylene as the fuel gas.

Rs 45000

Rs 50000

The 11M Wire Flame Spray Gun is a type of thermal spray gun used for applying protective coatings to metal surfaces. Unlike the 5M Wire Flame Spray Gun, the 11M gun uses a powder feedstock, which is fed into the gun and melted by the flame produced by a fuel gas and an oxidizer.

Rs 45000

Rs 50000

5M Wire Flame Spray Gun is type of thermal spray gun used for coating metal surfaces with a protective coating material. It uses a wire feedstock, typically made of metals or alloys, which is melted & atomized by a flame made by a fuel gas, such as acetylene or propane, & an oxidizer.

Rs 90000

Rs 90000

A manual bag dust collector is an industrial equipment designed to remove dust and other fine particles from the air in a manufacturing or processing facility.

Rs 90

Rs 90

Filter bag dust collector is type of air filtration system that uses fabric bags to capture & remove dust & other airborne particles from air. It is used in industrial sets, such as manufacturing facilities, metalworking shops, & woodworking shops, where large volumes of dust & debris are generated.

Rs 100000

Rs 120000

An industrial dust collector is a type of air filtration system designed to capture and remove dust and other airborne particles generated by industrial processes. These units are typically used in manufacturing facilities, metalworking shops, woodworking shops, and other industrial.

Rs 65000

Rs 70000

Portable dust collectors come in various sizes and styles, ranging from small tabletop models to large, wheeled units that can be easily moved around a job site. They typically use a combination of filters, such as pleated filters, HEPA filters, and bags, to capture dust and debris.

Rs 95000

Rs 100000

Mild steel wire is a type of steel wire that is commonly used in a variety of industrial and commercial applications. It is made from low carbon steel, which makes it more malleable and ductile than other types of steel. Mild steel wire is often used in construction, manufacturing, and fencing

Rs 200 /Kg

Rs 210 /Kg

Aluminum metalizing wire is a type of wire that is used in the metalizing process, which is a surface coating technique used to apply a thin layer of metal, typically aluminum, to a non-metallic surface. The wire is typically made of aluminum and is used in a metalizing gun, which heats the wire and

Rs 200 /Kg

Rs 250 /Kg

Cobalt wire is the wire used in thermal spray coating processes to create a layer of cobalt material on a surface. Thermal spray coating is a process where a coating material is melted and sprayed onto a surface using a thermal spray gun. The material is then rapidly cooled, forming a solid layer on

Rs 1900 /Kg

Rs 2000 /Kg

The monel wire is commonly used in applications where high strength and resistance to corrosion are required, such as in marine, aerospace, and chemical processing industries. It is also used in wire mesh screens, heating elements, and electrical contacts.

Rs 290 /Kg

Rs 300 /Kg

Rs 3000 /Kg

Rs 3500 /Kg

CuAl10 thermal spray wire is a type of wire made from the CuAl10 alloy that is used in the thermal spray process. Thermal spraying is a surface coating process that involves the application of a coating material to a substrate to provide improved performance and protection.

Rs 900 /Kg

Rs 1000 /Kg

420 stainless steel wire is a type of steel wire made from the 420 stainless steel alloy. It is a martensitic stainless steel, which means it has high strength, hardness, and wear resistance, but lower corrosion resistance compared to other stainless steels.

Rs 250 /Kg

Rs 300 /Kg

Tin wire is a type of wire that is made from tin, a soft, silvery-white metal that is often used as a coating for other metals to prevent corrosion. The tin wire is commonly used in a variety of applications, including electrical and electronic components, and as a component in soldering alloys.

Rs 750 /Kg

Rs 800 /Kg

Tungsten carbide wire is a type of wire that is made from tungsten carbide, a compound that consists of tungsten and carbon. Tungsten carbide is known for its high hardness, strength, and resistance to wear and corrosion, which makes it a popular material for a wide range of industrial applications.

Rs 3900 /Kg

Rs 4000 /Kg

Stainless steel thermal spray wire is a type of wire that is used in the thermal spraying process, which involves melting and atomizing metal particles and spraying them onto a substrate to create a coating.

Rs 1900 /Kg

Rs 2000 /Kg

An abrasive blasting hose coupling is a connector that attaches an abrasive blasting hose to a sandblasting nozzle or other equipment. It is designed to withstand the high-pressure and abrasive nature of the blasting process and typically has a locking mechanism to prevent accidental

Rs 300

Rs 350

A multi-cyclone dust collector is a type of air pollution control device used in industries to separate particulate matter from gas streams.

Rs 300000 /Kg

Rs 300000 /Kg

A cyclone dust collector is a type of two-stage dust collector that uses a cyclonic separation process to remove wood dust and debris from the air.

Rs 200000 /Kg

Rs 200000 /Kg

A grit blasting hose is a type of hose used in grit blasting applications to transfer the abrasive material, such as sand, garnet or aluminum oxide, from the blasting machine to the nozzle. The hose is designed to withstand the harsh environment of grit blasting, including high pressure, abrasion, a

Rs 300 /Kg

Rs 350 /Kg

A woodworking dust collector is a machine that is used to collect wood dust and debris that is created during the woodworking processes.

Rs 1000000

Rs 1000000

A shot blasting hose is a type of hose used in shot blasting applications to transfer the abrasive material, such as ceramic or steel shot, from the blasting machine to the nozzle. The hose is designed to withstand the harsh environment of shot blasting, including high pressure, abrasion, and impact

Rs 120 /Kg

Rs 150 /Kg

A ceramic shot blasting nozzle is a type of nozzle used in shot blasting applications to propel small ceramic particles or shot against a surface to clean, strip or prepare it for coating or painting. The nozzle is designed to withstand the harsh environment of shot blasting and direct the ceramic

Rs 100

Rs 150

A cartridge filter dust collector is a type of air filtration system used to capture and remove dust and other fine particles from the air in industrial and commercial settings.

Rs 2000000 /Kg

Rs 2000000 /Kg

A pressure blasting nozzle is a type of nozzle used in abrasive blasting applications that operates by using pressurized air or water to propel abrasive particles against a surface. The nozzle is designed to withstand high pressure and velocity of the abrasive particles and direct them toward the t

Rs 3000

Rs 3200

An angled tungsten carbide blasting nozzle is a type of nozzle used in abrasive blasting applications. It is made of tungsten carbide material and has an angled shape, which is designed to provide more precise and targeted blasting of hard-to-reach areas.

Rs 5000

Rs 5500

Grey tungsten carbide nozzles can also be used for abrasive blasting applications. These nozzles are made of tungsten carbide material and are designed to withstand the harsh environment of abrasive blasting, where the nozzle is subjected to high pressure and abrasive particles.

Rs 450

Rs 500

Molybdenum powder is a fine, grayish-black powder that is made from the metal molybdenum, which has a high melting point and is frequently used as an alloying agent in steel production.

Rs 150 /Kg

Rs 150 /Kg

Cermet powder is a compound material that consists of ceramic and metallic components. The properties of cermet powders, such as their high strength, hardness, wear resistance, and corrosion resistance, make them ideal for use in harsh environments where other materials may fail.

Rs 4000 /Kg

Rs 10000 /Kg

Ceramic powder is a granular and finest material consisting of various types of ceramics, such as oxides, carbides, nitrides, and borides. It is basically used in the manufacturing of advanced ceramics, refractories, and other industrial applications.

Rs 300 /Kg

Rs 300 /Kg

Tungsten carbide powder is an adaptable material that finds use in several industrial applications due to its extraordinary properties. It is a compound made of tungsten and carbon atoms, with a chemical formula of WC.

Rs 3000 /Kg

Rs 5000 /Kg

Calcite powder is the excellent and most often used mineral because of its well-defined characteristic. Various industries such as the chemical, pharmaceutical, and material sectors, have a well-built demand for fine powder.

Rs 7 /Kg

Rs 9 /Kg

A rubber sheet is often used in shot blasting machines as a protective lining to prevent damage to the surface being blasted and to reduce the impact of the shot or abrasive material. The rubber sheet is typically placed inside the shot blasting chamber or on the surface being blasted.

Rs 180 /Kg

Rs 200 /Kg

A deadman handle is a safety device used in abrasive blasting systems to control the flow of abrasive material and compressed air. It is also known as a deadman switch or a deadman valve.

Rs 900

Rs 1000

Feldspar powder is a fine-grained mineral that is commonly used in the manufacturing of ceramics, glass, and enamel.

Rs 9 /Kg

Rs 12 /Kg

An air filter regulator is an essential component of an abrasive blasting system. It is used to regulate the air pressure and filter out impurities in the compressed air supply that powers the blasting equipment.

Rs 3000

Rs 3100

A sand blasting helmet is a type of protective headgear worn by workers who engage in sand blasting or abrasive blasting activities. Sand blasting involves the use of high-pressure air or water to spray abrasive materials, such as sand, at a surface to remove rust, paint, or other coatings.

Rs 5500

Rs 6000

Steel Shot S930 is an abrasive medium that is created from high-quality steel and precision-manufactured to assure constant size and shape. It is ideal for removing rust, paint, and other surface impurities from a range of surfaces. With an S930 classification and a nominal size of 2.40 mm, this steel shot is suitable for a wide range of blasting applications, from heavy-duty industrial cleaning to delicate surface preparation.

Rs 70 /Kg

Rs 80 /Kg

Steel Shot S780 is a superior abrasive blasting medium that performs well in the most demanding industrial applications. This shot, with a diameter of 2.0 mm and a hardness of 60-65 HRC, is designed to provide high impact resistance, durability, and surface coverage.

Rs 70 /Kg

Rs 80 /Kg

Steel Shot S660 is a premium-grade abrasive blasting media that is engineered to operate exceptionally well in the most demanding industrial applications. This shot, with a diameter of 1.70 mm and a hardness of 55-60 HRC, is designed to provide high impact resistance, durability, and surface coverage.

Rs 70 /Kg

Rs 80 /Kg

Steel Shot S460 abrasive blasting media is of the finest quality and is carefully made for use in demanding industrial applications. This shot is composed of high-carbon steel and is precisely crafted to meet the highest performance and quality standards.

Rs 70 /Kg

Rs 80 /Kg

A high-quality, durable, and flexible abrasive blasting media is Steel Shot S460. Because it is comprised of high-quality steel, it is a common option for industrial cleaning, surface preparation, and finishing applications. Its spherical shape enables for continuous and efficient blasting, while its hardness and longevity allow for repeated use without degrading performance.

Rs 70 /Kg

Rs 80 /Kg

Steel Shot S390 is a steel abrasive medium that is used for cleaning, peening, and surface preparation on a variety of materials. It is spherical in form and composed of high-quality carbon steel. The ISO steel shots S390 have a diameter of 1.0 mm, making them an excellent choice for a variety of applications.

Rs 70 /Kg

Rs 80 /Kg

Steel Shot S330 is the most cost-effective and energy-efficient metal abrasive media available. Stainless steel shots of various diameters are available as needed. More Life Span, till it is reduced to the smallest particles. 330 steel shots Increase the fatigue life of the blasted components. There is no possibility of dust accumulation during steel shot blasting. It speeds up the cleaning process. Steel shot S330 Reduce the cost of maintaining shot blasting equipment. There is no dust or health concern while using steel shots. Steel Shots are utilized in a wide range of industries.

Rs 70 /Kg

Rs 80 /Kg

Steel shot S280 is among the most often used abrasive media for polishing, cleaning, and stripping metal surfaces. S280 steel shot is often used in the shot blasting and sand blasting industries. The grade or size of the steel shot has an impact on how the metal surface is polished.

Rs 70 /Kg

Rs 80 /Kg

Rs 70 /Kg

Rs 80 /Kg

A remote control valve can also be used in abrasive blasting applications to control the flow of abrasive media from the blast pot to the blasting nozzle. In this context, the remote control valve is typically used to start and stop the flow of abrasive media, adjust the flow rate of the media, and

Rs 9000

Rs 10000

S170 steel shot is a common metal abrasive for industrial surface preparation. These high-quality, rounded steel shots are created by the atomization process, which entails melting high-quality steel and then spraying it with water or air to form small, rounded particles. Steel shot s170 is constructed of high-quality steel and has a hardness of 40-50 HRC, making it suitable for a variety of surface preparation tasks.

Rs 70 /Kg

Rs 80 /Kg

Steel Shots S110, a metallic abrasive substance, is primarily used in the surface preparations industry. Steel shot S110 is a specific size or grade of steel shot used as abrasive media with an mm size of roughly 0.30. Because of its distinctive size, it is very useful for light surface preparation activities in the metal industry. S110 steel shot is made from high-quality steel. It is especially trustworthy for use in shot blasting machines since it may be reused.

Rs 70 /Kg

Rs 80 /Kg

In shot peening and abrasive blast cleaning, Steel Shot S70 is a ballistic material frequently used as a projectile. Steel Shot S70 is an iron-carbon alloyed metallic pellet that is bluish-gray and black in hue. They can have a variety of finishes applied to them to offer differing levels of corrosion protection.

Rs 70 /Kg

Rs 80 /Kg

The suction blasting Y gun is an integral part of the suction blasting system. It is designed to draw abrasive media into the air stream and mix it with compressed air to create a high-velocity stream of abrasive particles. The gun typically consists of a nozzle, an air jet, and a suction feed hose.

Rs 2000

Rs 2200

Alloy 625 wires are a type of high-performance wire made from an alloy of nickel, chromium, and molybdenum. This alloy is known for its exceptional strength, toughness, and resistance to corrosion in a variety of harsh environments, including high-temperature and high-pressure environments.

Rs 300 /Kg

Rs 350 /Kg

Bentonite powder is a versatile mineral used in a wide range of industrial and consumer applications.

Rs 15 /Kg

Rs 15 /Kg

The bronze wire is a type of wire made from an alloy of copper and other metals, such as tin, aluminum, or nickel. Bronze is a strong and durable material that is resistant to corrosion, making it a popular choice for wire applications in industries such as aerospace, marine, and automotive.

Rs 4000 /Kg

Rs 4200 /Kg

Bentonite powder is a versatile mineral used in a wide range of industrial and consumer applications.

Rs 5 /Kg

Rs 5 /Kg

Fly ash powder is a by-product of coal-fired power plants and is generally used as additional contentious material in construction.

Rs 5 /Kg

Rs 5 /Kg

Copper spray wire is used in thermal spray applications to provide a coating on a surface. Thermal spray is a process in which material is melted or heated and then sprayed onto a surface to form a coating. In the case of copper thermal spray wire, copper is melted, & then sprayed onto the surface.

Rs 3500 /Kg

Rs 3600 /Kg

Gypsum powder, also known as calcium sulfate dihydrate, is a common mineral used in construction materials and various industrial applications. It is a fine white powder obtained by heating gypsum rock to remove the water content.

Rs 7 /Kg

Rs 7 /Kg

High-Velocity Oxygen Fuel (HVOF) guns are advanced thermal spray guns used to apply coatings with high bond strength and wear resistance onto various surfaces.

Rs 50000 /Kg

Rs 50000 /Kg

Wire flame spray guns are a type of thermal spray gun used in the coating industry to deposit metallic coatings onto surfaces.

Rs 50000 /Kg

Rs 50000 /Kg

Flame spray guns are commonly used in the thermal spray coating industry to deposit a variety of materials onto various surfaces.

Rs 45000 /Kg

Rs 50000 /Kg

Nickel wire is a type of wire made from nickel, a silvery-white metallic element that is known for its resistance to corrosion and high melting point. Nickel wire is commonly used in a variety of applications, including heating elements, electrical and electronic components, and industrial equipment

Rs 3000 /Kg

Rs 3300 /Kg

Arc spray guns are commonly used in the thermal spray coating industry to deposit metallic or ceramic coatings on various surfaces.

Rs 45000 /Kg

Rs 50000 /Kg

Metalizing wire refers to the process of applying a thin layer of metal coating to a wire or cable. The process is typically done by heating the metal to its melting point and then spraying it onto the surface of the wire using a special thermal spray gun or torch.

Rs 3000 /Kg

Rs 3500 /Kg

Aluminum wire is a type of electrical wire that is made of aluminum instead of copper. It is commonly used in residential and commercial wiring applications because it is cheaper and lighter than copper wire. However, it is not as conductive as copper wire, and it can be more prone to corrosion and

Rs 350 /Kg

Rs 390 /Kg

White Aluminum Oxide abrasive media is a high-purity, high-quality abrasive media that is commonly used for surface preparation, cleaning, and finishing applications. This abrasive media is made from pure aluminum oxide, which makes it an ideal choice for a wide range of industrial applications.

Rs 40 /Kg

Rs 40 /Kg

Pink Aluminum Oxide abrasive media is a unique type of abrasive media that is made from a fusion of alumina and chromium oxide. This abrasive media is known for its exceptional hardness, toughness, and high performance, making it an ideal choice for a wide range of industrial applications.

Rs 35 /Kg

Rs 40 /Kg

Brown Aluminum Oxide abrasive media is a versatile type of abrasive media that is commonly used for surface preparation, cleaning, and finishing applications. This abrasive media is made from high-quality bauxite and is known for its toughness, durability, and excellent performance.

Rs 25 /Kg

Rs 30 /Kg

Black Aluminum Oxide abrasive media is a unique type of abrasive media that is made from a fusion of bauxite and iron oxide. This abrasive media is known for its extreme hardness, toughness, and durability, making it an excellent choice for heavy-duty applications.

Rs 52 /Kg

Rs 60 /Kg

Virgin Aluminum Oxide abrasive media is a high-quality abrasive media that is commonly used for surface preparation, cleaning, and finishing applications. This abrasive media is made from pure aluminum oxide, which makes it an ideal choice for a wide range of industrial applications.

Rs 25 /Kg

Rs 30 /Kg

Molybdenum wire is a type of wire made from molybdenum, a refractory metal with a high melting point and good mechanical properties. It is commonly used in high-temperature applications such as heating elements, furnace components, and as a filament in the lighting industry.

Rs 6000 /Kg

Rs 8000 /Kg

Zinc wire is a type of wire that is made from zinc, a metallic chemical element with the atomic number 30. Zinc wire can be used for various purposes, including electrical and thermal conductivity, as well as for decorative purposes.

Rs 400 /Kg

Rs 450 /Kg

Babbitt wire is a type of metal wire that is typically made from a lead-tin copper alloy. It is commonly used in the manufacturing of Babbitt bearings, which are used to support rotating shafts in machineries such as engines, turbines, and generators. Babbitt wire is also used in construction.

Rs 3000 /Kg

Rs 3500 /Kg

Thermal spray wire is a type of material used in thermal spraying, a process that involves applying a coating of molten material onto a surface. The wire is typically made from a metal or alloy and is fed into a spray gun, where it is melted using a heat source, such as a flame or plasma arc gun.

Rs 340 /Kg

Rs 350 /Kg

Tungsten carbide grit is a hard and durable material that is perfect for a variety of applications where high wear resistance is required. Made from a combination of tungsten and carbon, this material is designed to provide superior strength and durability, making it an ideal choice for cutting, grinding, drilling, and surface preparation.

Rs 2500 /Kg

Rs 3000 /Kg

Plastic media is a versatile and effective solution for various surface finishing and cleaning applications. Made from high-quality synthetic polymers, plastic media is designed to provide a consistent and precise finish without damaging the underlying material. It can be used in a variety of industries, including aerospace, automotive, electronics, and medical.

Rs 300 /Kg

Rs 350 /Kg

Walnut shell abrasive media is a natural and environmentally friendly blasting material that is perfect for removing surface contaminants from delicate or sensitive surfaces. Made from crushed walnut shells, this abrasive media is gentle on surfaces, yet effective in removing surface imperfections.

Rs 65 /Kg

Rs 70 /Kg

Cut wire shot is a high-quality abrasive media that is ideal for cleaning, deburring, and peening a variety of materials, including metals, plastics, and ceramics. Made from high-carbon steel wire, this media is cut to a precise length, creating a sharp and durable abrasive surface that can effectively remove surface imperfections.

Rs 100 /Kg

Rs 150 /Kg

Quartz sand abrasive media is a high-quality blasting material that is perfect for a range of industrial applications. Made from pure, natural quartz, this abrasive media is hard, durable, and highly resistant to abrasion, making it ideal for removing rust, corrosion, and other surface imperfections from a variety of materials, including metal, glass, and ceramics.

Rs 10 /Kg

Rs 20 /Kg

An air compressor is a device that converts power, typically from an electric motor, gasoline engine, or diesel engine, into potential energy stored in compressed air. This compressed air can then be used for a variety of applications, such as powering pneumatic tools, inflating tires, or operating

Rs 50000

Rs 50000

Silicon carbide abrasive media is a highly effective blasting material that is perfect for heavy-duty industrial applications. This durable media is made from a combination of silicon and carbon, which gives it exceptional hardness and abrasion resistance.

Rs 90 /Kg

Rs 120 /Kg

Boron carbide nozzles are used in a variety of industrial applications, including sand blasting, shot peening, and waterjet cutting. They are also used in the aerospace industry for rocket engine nozzles and in the defense industry for armor plating. Boron carbide nozzle refers to a type of nozzle

Rs 2500

Rs 3000

Aluminum oxide abrasive media is a versatile and high-performance abrasive material used for surface preparation, cleaning, and finishing in various industries. Made from high-quality aluminum oxide particles, this media is hard, durable, and can effectively remove rust, paint, and other coatings.

Rs 40 /Kg

Rs 60 /Kg

A tungsten carbide nozzle is a type of nozzle commonly used in sand blasting and abrasive blasting applications. Tungsten carbide is a durable and wear-resistant material that can withstand the harsh conditions of abrasive blasting.

Rs 3500

Rs 4000

A mixing tube is a critical component in a sand blasting system that is responsible for combining the abrasive material and compressed air, creating a high-speed stream of abrasive particles that can be used for cleaning or surface preparation.

Rs 2650

Rs 2650

Abrasive garnet sand is a high-quality, natural mineral abrasive that is used for a wide range of applications. It is a hard, durable, and angular material that is specifically designed for abrasive blasting, waterjet cutting, and filtration systems.

Rs 70 /Kg

Rs 120 /Kg

Steel grit abrasive media is a highly effective and widely used abrasive material for various industrial applications, including surface preparation, cleaning, and rust removal. Steel grit is made from high-quality steel, which is crushed into small particles and then shaped into sharp, angular particles through a process called atomization.

Rs 110 /Kg

Rs 150 /Kg

The mushroom valve works by using a rubber or elastomer sleeve to create a seal between the valve body and the sandblasting hose. When the valve is closed, the sleeve is compressed between the body and the hose, blocking the flow of abrasive material.

Rs 800

Rs 800

In sand blasting applications, pinch valve sleeves must be able to withstand the abrasive nature of the materials being transported through the valve. Therefore, selecting the right sleeve material is critical to ensuring the valve operates effectively and safely.

Rs 400

Rs 450

A powder flame spray gun, also known as a powder flame spray torch, is a specialized tool used for thermal spraying of coatings on metal surfaces.

Rs 45000 /Kg

Rs 50000 /Kg

A pinch valve is a type of valve used to control the flow of fluids or gases through a pipeline or other conduit. It operates by using a flexible sleeve or tube, typically made of rubber or other elastomeric material, that is pinched or compressed by a mechanism to shut off or regulate the flow of t

Rs 2400

Rs 2500

A metalizing gun, also known as a metallizing spray gun or arc spray gun, is a specialized tool used in the process of metalizing or metallization.

Rs 45000 /Kg

Rs 50000 /Kg

Glass beads abrasive media is a widely used abrasive material for various industrial applications, including cleaning, polishing, and surface finishing. Glass beads are made from high-quality glass, which is melted and then shaped into small spherical beads. These beads are then heat-treated to increase their hardness and durability.

Rs 110 /Kg

Rs 150 /Kg

Copper slag is a by-product generated during the manufacturing of copper metal. It is a coarse, granular material with a dark black color and glassy appearance.

Rs 10 /Kg

Rs 15 /Kg

Zinc spray guns are specialized tools used in the process of applying zinc coatings to metal surfaces. The zinc coating is applied using a process called thermal spraying,

Rs 45000

Rs 50000

A sand blasting hose is a flexible tube used to connect sand blasting equipment, such as a sand blasting gun, to a source of compressed air or other power supply. The hose is designed to withstand the high-pressure and abrasive nature of the sand blasting process, which involves propelling abrasive

Rs 400

Rs 700

Discover our top-quality steel shots made from premium steel, designed to withstand heavy use and provide efficient surface preparation. Choose from a range of sizes to suit your needs and achieve the perfect finish every time. Order now and experience the difference for yourself.

Rs 110 /Kg

Rs 150 /Kg

Thermal spray guns are versatile and essential tools in a range of industrial applications. They are used to apply a wide variety of coatings to different surfaces, from metals to ceramics, plastics, and composites.

Rs 45000

Rs 50000

A Sand Blasting Nozzle Holder is a device used to secure a sand blasting nozzle onto a sand blasting gun or baton. The holder is typically made of a durable material such as aluminum or steel and is designed to withstand the high-pressure and abrasive nature of the sand blasting process.

Rs 400

Rs 300

A blasting nozzle, also known as a sand blasting nozzle or abrasive blasting nozzle, is a tool used in the process of blasting or cleaning a surface with high-pressure air or water and abrasive material such as sand, glass beads, steel shot, steel grit, silicon carbide or plastic particles.

Rs 20000

Rs 40000