A blasting nozzle, also known as a sand blasting nozzle or abrasive blasting nozzle, is a tool used in the process of blasting or cleaning a surface with high-pressure air or water and abrasive material such as sand, glass beads, steel shot, steel grit, silicon carbide or plastic particles.

Rs 20000

Rs 40000

A Sand Blasting Nozzle Holder is a device used to secure a sand blasting nozzle onto a sand blasting gun or baton. The holder is typically made of a durable material such as aluminum or steel and is designed to withstand the high-pressure and abrasive nature of the sand blasting process.

Rs 400

Rs 300

A sand blasting hose is a flexible tube used to connect sand blasting equipment, such as a sand blasting gun, to a source of compressed air or other power supply. The hose is designed to withstand the high-pressure and abrasive nature of the sand blasting process, which involves propelling abrasive

Rs 400

Rs 700

A pinch valve is a type of valve used to control the flow of fluids or gases through a pipeline or other conduit. It operates by using a flexible sleeve or tube, typically made of rubber or other elastomeric material, that is pinched or compressed by a mechanism to shut off or regulate the flow of t

Rs 2400

Rs 2500

In sand blasting applications, pinch valve sleeves must be able to withstand the abrasive nature of the materials being transported through the valve. Therefore, selecting the right sleeve material is critical to ensuring the valve operates effectively and safely.

Rs 400

Rs 450

The mushroom valve works by using a rubber or elastomer sleeve to create a seal between the valve body and the sandblasting hose. When the valve is closed, the sleeve is compressed between the body and the hose, blocking the flow of abrasive material.

Rs 800

Rs 800

A mixing tube is a critical component in a sand blasting system that is responsible for combining the abrasive material and compressed air, creating a high-speed stream of abrasive particles that can be used for cleaning or surface preparation.

Rs 2650

Rs 2650

A tungsten carbide nozzle is a type of nozzle commonly used in sand blasting and abrasive blasting applications. Tungsten carbide is a durable and wear-resistant material that can withstand the harsh conditions of abrasive blasting.

Rs 3500

Rs 4000

Boron carbide nozzles are used in a variety of industrial applications, including sand blasting, shot peening, and waterjet cutting. They are also used in the aerospace industry for rocket engine nozzles and in the defense industry for armor plating. Boron carbide nozzle refers to a type of nozzle

Rs 2500

Rs 3000

An air compressor is a device that converts power, typically from an electric motor, gasoline engine, or diesel engine, into potential energy stored in compressed air. This compressed air can then be used for a variety of applications, such as powering pneumatic tools, inflating tires, or operating

Rs 50000

Rs 50000

The suction blasting Y gun is an integral part of the suction blasting system. It is designed to draw abrasive media into the air stream and mix it with compressed air to create a high-velocity stream of abrasive particles. The gun typically consists of a nozzle, an air jet, and a suction feed hose.

Rs 2000

Rs 2200

A remote control valve can also be used in abrasive blasting applications to control the flow of abrasive media from the blast pot to the blasting nozzle. In this context, the remote control valve is typically used to start and stop the flow of abrasive media, adjust the flow rate of the media, and

Rs 9000

Rs 10000

A sand blasting helmet is a type of protective headgear worn by workers who engage in sand blasting or abrasive blasting activities. Sand blasting involves the use of high-pressure air or water to spray abrasive materials, such as sand, at a surface to remove rust, paint, or other coatings.

Rs 5500

Rs 6000

An air filter regulator is an essential component of an abrasive blasting system. It is used to regulate the air pressure and filter out impurities in the compressed air supply that powers the blasting equipment.

Rs 3000

Rs 3100

A deadman handle is a safety device used in abrasive blasting systems to control the flow of abrasive material and compressed air. It is also known as a deadman switch or a deadman valve.

Rs 900

Rs 1000

A rubber sheet is often used in shot blasting machines as a protective lining to prevent damage to the surface being blasted and to reduce the impact of the shot or abrasive material. The rubber sheet is typically placed inside the shot blasting chamber or on the surface being blasted.

Rs 180 /Kg

Rs 200 /Kg

Grey tungsten carbide nozzles can also be used for abrasive blasting applications. These nozzles are made of tungsten carbide material and are designed to withstand the harsh environment of abrasive blasting, where the nozzle is subjected to high pressure and abrasive particles.

Rs 450

Rs 500

An angled tungsten carbide blasting nozzle is a type of nozzle used in abrasive blasting applications. It is made of tungsten carbide material and has an angled shape, which is designed to provide more precise and targeted blasting of hard-to-reach areas.

Rs 5000

Rs 5500

A pressure blasting nozzle is a type of nozzle used in abrasive blasting applications that operates by using pressurized air or water to propel abrasive particles against a surface. The nozzle is designed to withstand high pressure and velocity of the abrasive particles and direct them toward the t

Rs 3000

Rs 3200

A ceramic shot blasting nozzle is a type of nozzle used in shot blasting applications to propel small ceramic particles or shot against a surface to clean, strip or prepare it for coating or painting. The nozzle is designed to withstand the harsh environment of shot blasting and direct the ceramic

Rs 100

Rs 150

A shot blasting hose is a type of hose used in shot blasting applications to transfer the abrasive material, such as ceramic or steel shot, from the blasting machine to the nozzle. The hose is designed to withstand the harsh environment of shot blasting, including high pressure, abrasion, and impact

Rs 120 /Kg

Rs 150 /Kg

A grit blasting hose is a type of hose used in grit blasting applications to transfer the abrasive material, such as sand, garnet or aluminum oxide, from the blasting machine to the nozzle. The hose is designed to withstand the harsh environment of grit blasting, including high pressure, abrasion, a

Rs 300 /Kg

Rs 350 /Kg

An abrasive blasting hose coupling is a connector that attaches an abrasive blasting hose to a sandblasting nozzle or other equipment. It is designed to withstand the high-pressure and abrasive nature of the blasting process and typically has a locking mechanism to prevent accidental

Rs 300

Rs 350