Bearing UCP 216

The bearing UCP 216 is a heavy-duty pillow block bearing unit designed to support large shaft diameters in high-load conditions. This is an industrial bearing UCP-216, which is a precision deep groove ball bearing insert housed in a cast iron housing. This is designed to support high loads and is suitable for supporting large shaft diameters.
The bearing UCP-216 is designed to meet the performance requirements of the industrial sector. This is a high-load bearing designed to support both high radial loads and moderate axial loads. The solid base housing of the bearing ensures the shaft is securely mounted, thereby minimizing vibration and ensuring precise shaft alignment. This is highly suitable for high-load machinery.
The technical advantage of the bearing UCP-216 is its self-aligning feature. This is designed to compensate for shaft deflection and inaccurate shaft alignment. This ensures the elimination of stress, thereby ensuring the long life of the bearing and eliminating the possibility of premature failure. The bearing is also designed with a set screw locking mechanism to ensure the shaft is securely locked and cannot slip.
In addition, the bearing is pre-lubricated with high-grade lubrication grease and is re-lubricatable via the grease nipple. The bearing housing is finished with a corrosion-resistant coating, which enables the bearing to function effectively even in dusty, humid, and chemically contaminated environments.
The​‍​‌‍​‍‌​‍​‌‍​‍‌ capacity of UCP 216 is increased to more than 5 times that of UCP 205, 1.5 times that of UCP 212, and so on, making it very suitable for the biggest and heaviest applications in the range of insert ball bearing ​‍​‌‍​‍‌​‍​‌‍​‍‌units. From the performance point of view, the bearing UCP-216 is highly durable, requires less maintenance, and is highly efficient. The bearing is the best solution for engineers looking for a reliable and technically advanced bearing.

Design & Engineering Features of UCP 216 Bearing

• Self-Aligning Bearing Insert: Helps to compensate for any misalignment of the shaft, which reduces the concentration of stresses.
• Heavy-Duty Cast Iron Housing: Offers high structural strength along with good vibration-damping characteristics.
• Set Screw Locking System: Helps to ensure the secure fixing of the shaft even at high speeds.
• Advanced Sealing Mechanism: Helps to protect against dust, moisture, and contaminants.
• Re-lubrication Capability: Equipped with a grease nipple for periodic re-lubrication for longer operating efficiency.

Installation & Maintenance Guidelines on UCP216

• Proper tolerance of the shaft should be ensured, which is normally 80 mm.
• The base of the housing should be properly aligned, avoiding excess stress.
• Set screws should be tightened evenly for effective locking of the shaft.
• Grease used should be industrial grade for effective re-lubrication.
• Seals should be checked periodically for maximum efficiency.
• Bearing should not be overloaded for maximum utilization.

Product Comparison